Home > Model Trains >

  Athearn Genesis HO G97228 4-6-6-4 Challenger, Denver and Rio Grande Western #3800 (DCC and Tsunami Sound)
Athearn HO G97228 4-6-6-4 Challenger, Denver and Rio Grande Western #3800 (DCC and Tsunami Sound)
 
 


Retail Price: $599.98
Our Price: $449.99
Sale Price: $399.99
You save $199.99!

Quantity in Stock :(Out of Stock)
Product Code: ATH-G97228
Qty:

Description
 
In the 1930s, with freight traffic increasing, the Union Pacific Railroad had to use combinations of its 2-8-8-0 and 2-10-2 locomotives to get trains over the rugged grades of the Wahsatch Mountains. To stay competitive, a more powerful locomotive was needed to speed up the railroad and to reduce the rising cost of helpers and extra trains. The UP simply needed a locomotive that could climb the Wahsatch faster.

Arthur H. Fetter, the General Mechanical Engineer, had been designing locomotives for the Union Pacific since 1918, and had been responsible for the development of its 4-8-2 "Mountain" and 4-10-2 "Overland" locomotives as well as many other innovations and improvements to UP motive power. Fetter suggested a high speed articulated locomotive to reduce the reciprocating weight of a compound and to increase the 50 mph speed limit of the railroad's most powerful locomotives, the rigid wheeled 4-12-2s.

Fetter had a long standing working arrangement with the American Locomotive Company and he often collaborated with ALCO's engineers on locomotive designs. For the new more powerful locomotive he and the ALCO engineers started with the 4-12-2. They decided that the leading four wheel truck would be needed for better side control. They split the six sets of drivers into two groups of three and replaced the two 27" outside cylinders and the one 31" middle cylinder with four 22" x 32" cylinders. Two inches were added to the diameter of the boiler and the pressure was raised from 220 psi to 255 psi. The firebox was enlarged and they added a four wheel trailing truck to carry its added weight.

The first 4-6-6-4, UP number 3900, was received from ALCO at Council Bluffs on August 25, 1936, and after a brief ceremony it headed west pulling a refrigerator train.

During a meeting in 1936, in which Otto Jabelmann, the VP of Research, and William Jeffers, the Executive VP of the Union Pacific System listened to J. W. Burnett, the General Superintendent of Motive Power and Machinery, propose a test run for the new locomotive. Burnett had decided to operate it unassisted from Ogden to Wahsatch and then run fast over to Green River before turning back to Ogden with another train. Burnett said "that is a challenge for any locomotive" and Jeffers replied "it certainly is... let's call them "Challengers". After the meeting Jeffers sent a memo to the Advertising Department in which he said he wanted the name "Challenger" used in all press releases about the new locomotive.

The Union Pacific Railroad would buy a total of 105 "Challengers" and eight other railroads would use the other 147 of the total 252 that were built. The Baldwin Locomotive Works built 27 of the 4-6-6-4s. The American Locomotive Company built the rest.
Features
Athearn Genesis HO Scale 4-6-6-4 Challenger Features: Boiler Blackened with Full Details and Printed Gauges Individually Applied Detail Parts Such as Piping, Valves, Generators, and Etc. Blackened Metal RP25 Wheels Eccentric Cranks Operating on Both Sides in Correct Direction Front and Rear Engines (Cylinders and Couple Drive Wheel Sets), Both Pivot for 22" Recommended Minimum Radius Pilot has Open and Closed Positions Coupler Pocket can be Inserted to Mount Coupler Adjustable Cab Windows and Opening Doors Headlights and Tender Lighting Feature Directional Light Change Number Boards are Also Lighted Five Pole Skew Armature Motor with Two Flywheels for Very Smooth Running Cab Hatches can be Either Closed or Open See Through Running Boards Ready for Aftermarket Smoke Unit Installation with No Soldering Needed Factory Installed DCC Sound Board and Speaker, which are Mounted in the Tender DCC Decoder Automatically Senses the Power Supply Type (Either DC or NMRA Compliant DCC System)



Share your knowledge of this product with other customers... Be the first to write a review