Landscaping (Foliage, Trees, Water, Ballast)
Terrain (Rocks, Culverts, Tunnels)
Sub Terrain Layout Foam
Roads & Sidewalks
Plaster & Sculptamold
DCC, Sound & Power
DC Power Supplies
AC Power Supplies
O Gauge Digital Command
Analog Sound Systems
Painting & Decals
Airbrushes & Supplies
Brushes & Applicators
Decals & Decal Solutions
Paint Stripper, Thinner & Cleaning Supplies
Bars, Beams, Columns & Trusses
Freight & Passenger Car Siding
Screws, Nuts & Washers
Stairs, Ladders & Railing
Strips & Sheets
Tubing & Rods
Wire & Mesh
Other Building Supplies
Bottles & Tips
Hobby Cements & Putties
AC Adapters & Transformers
Terminal Blocks & Strips
Toggle & Push Button Switches
Wiring & Insulation
Other Electrical Supplies
Clamps & Vises
Drills & Drill Bits
Hobby Knives & Saws
Pliers & Cutting Tools
Foam Working Tools
Hammers & Screwdrivers
Books & Videos
Apparel & Memorabilia
Slot Car Racing
Tank & Aviation Models
DCC Concepts CB1D Cobalt Turnout Motor, DCC On Board (Single Pack)
Retail Price: $38.45
You save $5.76!
Quantity in Stock :6
Extended Information / Video
This DCC ready tortoise switch machine is the perfect addition in efficiency for operating your model train set. With this you will be able to execute a track switch with a breeze.
This is Cobalt Digital is DCC Ready.
You can set the address couldn't be easier! Carefully place the switch into the "Set" position and follow your DCC Controllers instructions for OPERATING an accessory decoder (use the number chosen for the Cobalt you are programming). Digital Cobalt will now know its address, so just reset the switch back to "Run" and its ready to use.
Wiring is simple. Connect DCC power to 1 & 2. Connect frog polarity control wire to 3. If you also want to have manual control, just connect a standard pushbutton switch to 4 & 5. If you wish, you can control signals or panel LEDS etc with terminals 6,7, & 8 (Terminal 8 is the
SPDT switch common).
Is a high quality DC motor driven actuator created to be the best product available for turnout or signal control in any modelling scale from N to O.
* Cobalt is smaller yet much stronger:
While it is only 45% of the physical volume of its nearest competitor, it has a much higher gear ratio, superior throw strength and far greater stability than any other similar product at the end of throw.
* Cobalt is quieter and more robust:
The design has been made much stronger than all of its competitors yet it is quiet in operation. We did this by choosing higher quality plastics and specifying a heavy walled internal design that adds to stability while lowering mechanism resonances. Gears are specifically tooled for Cobalt and are made with the best available material which is fibre reinforced nylon for quiet operation, incredible reliability and long life.
* Cobalt is voltage tolerant & low current:
Even at its maximum, at recommended voltages it draws only 30mA (that is a tiny 30 thousandths of an amp) yet it works well at 6v and very, very strongly at anywhere between 9 volts... and 15 volts DC.
Cobalt can be powered via a small “wall wart” type power supply and it can be switched by standard latching type switches, short term power such as pushbuttons or it can even be automated simply via use of DPDT relays.
Cobalt is totally comfortable with DCC decoders and any of the low power “stall type” accessory decoder with reversing power ability can be used. Additionally, by adding diodes, AC output DCC decoders with adequate supply voltages and adjustable pulse length can be used.
This power supply versatility, combined with very high gearing and variable fulcrum make it as tough or as gentle as it needs to be yet allows it to remain far more stable than any other turnout motor at the “end of throw”... whether the power is left on constantly or turned off once the work is done.
* Cobalt is very, very versatile in use and includes two SPDT switches
Because it will not relax even a bit at the end of throw Cobalt can be powered by almost ANY method that can deliver DC power and is compatible with almost every DC output DCC accessory decoder ever made.
Cobalt has two inbuilt SPDT “break before make” switches for frog power switching, panel lights, feedback or any other related control need. They are able to handle higher power than competitive products and are exceptionally reliable even under adverse conditions thanks to very positive and strong pressure formed phosphor bronze wipers and gold plated wiper contact areas.
Because of the very high gearing it is even easy to stop Cobalt mid-throw for control of 3 position semaphore signals and 3 way stub turnout operation!
Cobalt has also been designed from the ground up for either horizontal or vertical mounting which Makes it the perfect device for railway crossing barriers and proper control of delicate semaphore signals too.
* Cobalt has a positive but gentle and almost totally silent Action:
Because of its extremely powerful high ratio gearing it is equally effective when used as either a stall type or short term power device and does not relax at all at the end of throw.
Incredibly powerful as it is, it’s also designed to be gentle when needed and so the degree of pressure and range of its throw has been made easy to adjust over a wide range... Therefore extremely positive and silent action is there by design - whenever it is needed and consistently gentle treatment of your turnouts, signals or other items is absolutely guaranteed by design.
* Cobalt is easy to install.
Each Cobalt turnout motor comes complete with everything needed including the screws needed to fix it to the baseboard (We even supply 5 just in case you lose one). ....and we have also created a wide accessory range including pre-prepared switching.
Cobalt has been designed to be installed vertically for turnout operation or horizontally for semaphore signal or for things like vertical crossing boom actuation.
The actuator wire is of the correct stiffness for reliable turnout throw and has been pre-formed for easy mounting.
We’ve even designed a template that makes it dead easy to get it right the very first time in any scale... Used from above, with the drill kept vertical, it will result in the creation of ready-made accurate pilot holes for you to use when mounting Cobalt.
The fulcrum bar has a series of offset holes too, so if you DO manage to get it wrong... You can easily adjust the left/right bias of the throw simply by changing which hole the wire passes through!
Where a turnout or signal is close to a layout brace or if a standard direct linkage is not possible, it is simple to arrange Cobalt so that it provides an offset drive via a simple cranked wire arrangement (shown in our “tips” pages in the downloadable manual).
* Cobalt needs NO soldering.
Its no fun soldering under the baseboard... and edge connectors are hard to find and always expensive.
Cobalt has a very high quality 8 way solder-less connector that doesn't even need a screwdriver to give you a perfect connection in moments. (you may find a small blade type driver or similar tool a handy tool for helping with the “Push to insert” connector though)
If you DO prefer to solder... You can of course - And to make even that an easy and safe task...we have purposely chosen a connector which uses TWO solder points per connection point, so you can solder to one of these with no risk to the integrity of the connector or point motor, and the solder resist over all parts of the board other than the solder pad mean there is little chance of bridging connections.
* Installation template available
A metal template is available for precise installation for turnout control in all scales. The template allows you to establish perfect position & create pilot holes for mounting screws from ABOVE the baseboard with zero stress. Its even supplied with the correct size of pilot drill to use with it!
* Cobalt is incredibly reliable.
High quality engineering plastic, top quality gold plated 1.6mm fibreglass PCBs and very careful design make it bulletproof... So we can very confidently give Cobalt the best warranty ever!
Turnout Linkage Included SPDT Auxiliary Contacts Useable with all scales
Share your knowledge of this product with other customers...
Be the first to write a review
Advance Product Notifications
Become A Dealer
Terms & Conditions
©2014 MB Klein Inc. All Rights Reserved.
Shopping Cart Software
(Your shopping cart is empty)