Osborn Model Kits N 3030 Small Town Church Kit

The church kit is based on a typical small town wooden church built in the turn of the century.

Laser Cut Wood Kit
Footprint Measures 4.125" x 2.2"
Tools Required Area A Sharp Hobby Knife, C.A. Or White Glue, 120 Grit Sand Paper, Paint Brushes, Masking Tape, and Clamps

Includes:
2 Main Frame
4 Uprights
1 Lower Entrance Frames
1 Upper Entrance Frames
2 Entrance Uprights
2 Inner Wall Entrance
1 Main Roof Support
2 Main Roof Cross Support
1 Entrance Roof Support
1 Entrance Roof Cross Support
2 Front Steps
1 Front Door
10 Side and End Windows
2 Entrance Windows
2 Main Roof
2 Entrance Roof
2 Side Walls
1 Rear Wall
1 Front Wall
2 Entrance Side Walls
1 Entrance Front Wall
2 End Fascia
2 Side Fascia
2 Entrance Side Fascia
1 Entrance End Fascia
2 Railings
2 Lower Side Trim
1 Lower Rear End Trim
2 Lower Front Trim
2 Entrance Lower Side Trim
2 Entrance Lower Front Trim
Set Of Windows
Instructions