null Skip to Content
Compare
Share with a friend:

Athearn Genesis HO G40140 4-8-8-4 Big Boy, Union Pacific (Promontory) #4014

$679.98 $577.98
(You save $102.00 )
Availability:
Availability: Usually Ships in 5 to 7 Business Days
Current Stock Level:
Current Stock Level: 3
Share with a friend:

Description

The Union Pacific's Overland Route, the eastern portion of the Transcontinental Railroad, was built west from Omaha, across Nebraska and Wyoming, and on into Utah. The steepest grade was the eastbound climb on the Echo Canyon line through the Wahsatch Mountains just east of Ogden, Utah. Forty 4-6-6-4 Challenger locomotives were acquired in 1936 and 1937 to move fast freight over the grades in Utah and Wyoming. They were rated at 4,290 tons across Wyoming, but were limited to 3,100 tons eastbound through Echo Canyon.

Union Pacific wanted something that could make the same speeds as the Challengers but could carry the entire 4,290-ton train over the Wahsatch Mountains without a helper. The easiest solution was to scale up the successful Challenger design by adding another pair of drivers to each half of the locomotive thus making a 4-8-8-4.

In 1941 UP placed an order for twenty 4-8-8-4's, numbered 4000 through 4019, with the American Locomotive Works. Each engine cost $265,174. According to legend an unidentified machinist at the ALCO plant is responsible for the name "Big Boy", having scrawled the name in chalk on a partially completed locomotive.

The Big Boys were exactly what the railroad wanted. They were coal burners with 68-inch drivers, 135,375 pounds of tractive effort and 6,000 horsepower. They started service on the line from Ogden to Green River, Wyoming and their operating range soon increased to cover the line all the way to Cheyenne.

Traffic during WWII resulted in five more Big Boys, numbered 4020 through 4024, being built in 1944. These versions were slightly heavier than the original order due to wartime materials restrictions. Despite the influx of diesel locomotives following WWII, the Big Boys and Challengers remained the prime power on the Overland Route. They also saw service as helpers, leading gas turbines and diesels over Sherman Hill. They remained active through the 1950s and weren't retired until the early 1960s. By then the first twenty units had been run well over one million miles.

UP #4014 EXCURSION FEATURES:
Excursion Version with oil tender from UP 3985 per prototype configuration
Reporting marks only on rear tender face per prototype 2019 configuration
In service appearance
Commemorative box
Chalk marking "Big Boy" decal included (not applied)

UP #4014 PROMONTORY FEATURES:
Great Race to Promontory version with oil tender from UP 3985 per prototype configuration
Reporting marks only on rear tender face per prototype 2019 configuration
Freshly shopped shiny appearance
Commemorative box
Chalk marking "Big Boy" factory applied to smoke box face, per prototype during summer 2019. This marking is a subtle nod to history and ALCO legend.

Big Boy No. 4014 was delivered to Union Pacific in December 1941. The locomotive was retired in December 1961, having traveled 1,031,205 miles in its 20 years in service. Union Pacific reacquired No. 4014 from the RailGiants Museum in Pomona, California, in 2013, and relocated it back to Cheyenne to begin a multi-year restoration process. In 2019 UP #4014 was brought back to life. It had been almost 60 years and multiple generations since the last time a 4-8-8-4 Big Boy operated under its own power.

SURVIVING 4-8-8-4 BIG BOY PRESERVATION INFO:
4004: Holliday Park
4005: Forney Transportation Museum
4006: Museum of Transportation
4012: Steamtown National Historic Site
4017: National Railroad Museum
4018: Museum of the American Railroad
4023: Kenefick Park

PRESERVATION VERSION FEATURES:
As delivered from ALCO in service 1940s era
Coal Tender

Twenty-five Big Boys were built exclusively for Union Pacific Railroad, the first of which was delivered in 1941. The locomotives were 132 feet long and weighed 1.2 million pounds. Because of their great length, the frames of the Big Boys were "hinged", or articulated, to allow them to negotiate curves. They had a 4-8-8-4 wheel arrangement, which meant they had four wheels on the leading set of "pilot" wheels which guided the engine, eight drivers, another set of eight drivers, and four wheels following which supported the rear of the locomotive. The massive engines normally operated between Ogden, Utah, and Cheyenne, Wyo.

There are seven Big Boys on public display in various cities around the country. They can be found in St. Louis, Missouri; Dallas, Texas; Omaha, Nebraska; Denver, Colorado; Scranton, Pennsylvania; Green Bay, Wisconsin; and Cheyenne, Wyoming.

WARTIME ERA VERSION FEATURES:
As delivered from ALCO in service 1940s era
Coal Tender

LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Full cab interior with boiler backhead with printed gauges
Individually applied piping, valves, generators, etc.
Operating eccentric cranks on both sides operating in correct direction
Headlights and indicator number boxes (number boards) with directional light change
Five pole, skewed armature motor with dual flywheels for smooth operation
Pivoting front and rear engines for negotiating 22" radius curves
See-through running boards
Smoke unit ready with no soldering required
See through cab windows
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power

SKU: ATH-G40140

Why ModelTrainStuff.com?

We've been helping hobbyists realize their dreams for over 100 years! From our early days as a general hardware store in Baltimore, Maryland, to now, as a leading name in the model train business. With thousands of products available in all scales from O to Z, we have everything you need to build, maintain, and expand your railroad empire.

Icon Top Rated

Top Rated

We're known internationally for our knowledge, service and reliability.

Icon Curated by Experts

Curated by Experts

We don't just sell trains; many of our staff members are railfans themselves!

Icon Great Customer Service

Great Customer Service

Our experts are always ready to assist with any questions you might have.


Frequently Bought With

Reviews


Instagram Feed

Share your layout and purchases with our community! Simply tag us in your photos on Instagram for the chance to see them appear here!

Follow Us

Need help with a product?

Our friendly customer support people are eager to take your call!

Contact Us