Digitrax N DN126M2 1.5 Amp Series 6 Board Replacement Decoder for MicroTrains Line SW1500 units


$35.00 $27.99
(You save $7.01)
(3 reviews) Write a Review
Usually Ships in 2 to 3 Business Days
Digitrax N DN126M2 1.5 Amp Series 6 Board Replacement Decoder for MicroTrains Line SW1500 units
Share with a friend:
Current Stock Level: 14


Digitrax DN126M2 N 1.5 Amp Series 6 Board Replacement Decoder for MicroTrains Line SW1500 units

- Program CVs using any Digitrax Compatible Control system without havingto buy any extra equipment.
- Plug N Play 8-pin Medium DCC plug design makes installation quick and easy.
- 2 Digit and 4 Digit Addressing.
- Basic, Advanced & UniVersal Consisting.
- SuperSonic motor drive for silent operation.
- Direct mode programming.
- Decoder Reset CV with or without speed table reset.
- Transponder Equipped ready for transponding on your Layout.
- Motor Isolation Protection helps prevent damage to your decoder.
- Automatic Analog Mode Conversion when running on DC layout.
- Decoder Lock for individual programming of multiple decoders in one loco.
- Digitrax "No Worries" Warranty.
- Dimensions: .418" x .621" x .107" (10.63mm x 15.79mm x 2.72mm)
- Fits MicroTrains Line SW1500 units

FX3 Function outputs for prototypical lighting effects and on/off control:
- Constant Brightness Lighting with directional or independent control.
- Optimized selectable LED or incandescent lamp operation
- Realistic Effects like Ditch lights, Mars lights, strobes, and many more
- Configurable Pulse Function available on all function outputs.
- FX3 & Standard Function Qualifiers operate functions based on direction,
- F0 on or off, direction and F0, and whether loco is moving.
- Function Mapping for custom function setup.
- Master Light Switch turns off all lights & functions with one keystroke.
- Advanced Consist Function Controls.

Digitrax LocoMotion System -- Your locomotives look like the real thing.
- The Digitrax LocoMotion System makes them run like the real thing, too!
- Scaleable Speed Stabilization (Back EMF) with simple setup & 256 level resolution.
- Torque Compensation.
- 128 Speed Step operation (14 or 28 steps can also be used).
- Momentum with acceleration and deceleration.
- Normal Direction of Travel is user selectable.
- Switching Speed feature for easier and faster access to yard speeds.
- 3 Step Speed Tables set start, mid and max voltage for custom control.
- 28 Step Speed Tables with 256 level resolution for precise control.

Read More >

3 Reviews Hide Reviews Show Reviews

  • 4

    Posted by Jim Musson on Jun 29th 2018

    Nothing wrong with this decoder but the SW1500 is constructed so it's almost impossible to take apart without damage. Also solder pads on decoder may need to be thinned to fit in.

  • 1
    Bad Luck

    Posted by Russell on Jun 29th 2018

    I've had nothing but bad luck with this product. After three installs I wouldn't recommend this at all. Digitrax has put copious amounts of solder on the contact pads......This is not a true plug-n'-play. Either you'll have to take some solder off the card or mill and file the frame or BOTH! PITA! Why is there so much solder??? Going to try a different brand.

  • 5
    Digitrax Decoder DM126M

    Posted by Mike Reardon on Apr 24th 2018

    Great decoder for the price, easy to install.