Digitrax N/HO DN136D Wire-in Mobile Decoder (3 FX3 Functions, 0.5 Amp)


$21.00 $16.79
(You save $4.21)
(1 review) Write a Review
Usually Ships in 2 to 3 Business Days
Digitrax N/HO DN136D Wire-in Mobile Decoder (3 FX3 Functions, 0.5 Amp)
Share with a friend:
Current Stock Level: 9


Wired Motor & Function Decoder that fits many N and HO Scale Locos.Size: .55" x .404" x .2"13.9mm x 10.3mm x 5 mmN/HO Scale1.0 Amp/1.5 Amps Peak3 FX3 Functions, 0.5 Amp

FX3 Function outputs for prototypical lighting effects and on/off control:Constant Brightness Lighting with directional or independent control.Optimized selectable LED or incandescent lamp operationRealistic Effects like Ditch lights, Mars lights, strobes, and many moreConfigurable Pulse Function available on all function outputs.FX3 & Standard Function Qualifiers operate functions based on direction,F0 on or off, direction and F0, and whether loco is moving.Function Mapping for custom function setup.Master Light Switch turns off all lights & functions with one keystroke.Advanced Consist Function Controls.Digitrax LocoMotion System-Your locomotives look like the real thing.The Digitrax LocoMotion System makes them run like the real thing, too!Scaleable Speed Stabilization (Back EMF) with simple setup & 256 level resolution.Torque Compensation.128 Speed Step operation (14 or 28 steps can also be used).Momentum with acceleration and deceleration.Normal Direction of Travel is user selectable.Switching Speed feature for easier and faster access to yard speeds.3 Step Speed Tables set start, mid and max voltage for custom control.28 Step Speed Tables with 256 level resolution for precise control.Program CVs using any Digitrax Compatible Control system without havingto buy any extra equipment.2 Digit and 4 Digit Addressing.Basic, Advanced & UniVersal Consisting.SuperSonic motor drive for silent operation.Direct mode programming.Decoder Reset CV with or without speed table reset.Transponder Equipped ready for transponding on your Layout.Motor Isolation Protection helps prevent damage to your decoder.Automatic Analog Mode Conversion when running on DC layout.Decoder Lock for individual programming of multiple decoders in one loco.Digitrax "No Worries" Warranty.

Read More >

1 Review Hide Reviews Show Reviews

  • 5
    Digitrax decoders work great!

    Posted by Tom H. on Jun 29th 2018

    I began installing decoders in my locomotive fleet using NEC decoders (initially a 10-pack). However, once I started using Digitrax decoders, there was no going back to NEC. I find Digitrax decoders (I have installed Z, N and HO styles) to be easier to install and wire primarily due to their use of plug-in harnesses to the decoder (the NEC decoder's wires seem to easily break when handling and are just fragile) and I like the fact that Digitrax covers their decoders in shrinkwrap. I have had less issues programming the configuration of the Digitrax decoders, as well. I heartily recommended them!!