Digitrax N DN163K4A Plug and Play Decoder for Kato ACS64, 4-8-4 FEF, GE4/4 Glacier Express Locomotives

DIG-DN163K4A

$36.00 $28.79
(You save $7.21)
(2 reviews) Write a Review
Availability:
Usually Ships in 2 to 3 Business Days
Digitrax N DN163K4A Plug and Play Decoder for Kato ACS64, 4-8-4 FEF, GE4/4 Glacier Express Locomotives
Share with a friend:
Current Stock Level: 5

Description

Designed to Fit Kato ACS64, 4-8-4 FEF. GE4/4 Glacier Express Locomotives

Plug 'N Play design makes installation quick and easy.

Digitrax LocoMotion System-Your locomotives look like the real thing.

The Digitrax LocoMotion System makes them run like the real thing, too!
Torque Compensation for smooth as silk operation.
128 Speed Step operation (14 or 28 steps can also be used).
Momentum with acceleration and deceleration.
Normal Direction of Travel is user selectable.
Switching Speed feature for easier and faster access to yard speeds.
3 Step Speed Tables set start, mid and max voltage for custom control.
28 Step Speed Tables with 256 level resolution for precise control.

Scalable Speed Stabilization with simple setup & 256 level resolution.

SuperSonic motor drive for quiet operation.

FX3 Functions for prototypical lighting effects:

Constant Brightness Lighting with directional or independent control.
Realistic Effects like Ditch lights, Mars lights, strobes, and many more.
Dynamic and Static Qualifiers operate functions based on direction,
F0 on or off, loco direction and F0, and whether loco is moving.
Function Remapping for custom function setup.
Master Light Switch turns off all lights & functions with one keystroke.
Advanced Consist Function Controls.

White LEDs for added realism.

Transponder ID Equipped ready for transponding on your Layout Compatible with digital surround sound systems.

All Mode Programming with Operations Mode Read Back-read back CV values right on the mainline.

Decoder Factory CV Reset with or without speed table initialize.

Motor Isolation Protection helps prevent damage to your loco and decoder.

Basic, Advanced & UniVersal Consisting

2 Digit and 4 Digit Addressing

DCC Compatible

Read More >

2 Reviews Hide Reviews Show Reviews

  • 4
    The one for the Kato FEF-3!!!

    Posted by Chris on Jun 29th 2018

    Runs great with the Kato FEF-3 #844 ... And I really mean GREAT! Far better result than with the original decoder the loco came with!

  • 3
    good, not great but good...

    Posted by WhiskersTheWise on Jun 29th 2018

    There is a clip on the loco that will not go into the hole on the decoder as needed. You either have to cut it off or not install this decoder. You can't modify the hole on the decoder due to the tightness of the electronics. You will have to either solder or tape in place. Works good and sounds good though.