Digitrax Z/N/HO DZ126 Scale Mobile Decoder 1 Amp/1.5 Amp Peak, (2FX3 Functions, 0.5 Amp)


$22.00 $17.59
(You save $4.41)
(8 reviews) Write a Review
Usually Ships in 2 to 3 Business Days
Digitrax Z/N/HO DZ126 Scale Mobile Decoder 1 Amp/1.5 Amp Peak, (2FX3 Functions, 0.5 Amp)
Share with a friend:
Current Stock Level: 5


Fits Many Z, N and HO Scale LocomotivesSize: .455" x .369" x .126"11.56mm x 9.37mm x 3.2mmZ/N/HO Scale1.0 Amp/1.5 Amps Peak2 FX3 Functions, 0.5 Amp

- Program CVs using any Digitrax Compatible Control system without havingto buy any extra equipment.
- 2 Digit and 4 Digit Addressing.
- Basic, Advanced & UniVersal Consisting.
- SuperSonic motor drive for silent operation.
- Direct mode programming.
- Decoder Reset CV with or without speed table reset.
- Transponder Equipped ready for transponding on your Layout.
- Motor Isolation Protection helps prevent damage to your decoder.
- Automatic Analog Mode Conversion when running on DC layout.
- Decoder Lock for individual programming of multiple decoders in one loco.
- Digitrax "No Worries" Warranty.

FX3 Function outputs for prototypical lighting effects and on/off control:
- Constant Brightness Lighting with directional or independent control.
- Optimized selectable LED or incandescent lamp operation
- Realistic Effects like Ditch lights, Mars lights, strobes, and many more
- Configurable Pulse Function available on all function outputs.
- FX3 & Standard Function Qualifiers operate functions based on direction,
- F0 on or off, direction and F0, and whether loco is moving.
- Function Mapping for custom function setup.
- Master Light Switch turns off all lights & functions with one keystroke.
- Advanced Consist Function Controls.

Digitrax LocoMotion System -- Your locomotives look like the real thing!
The Digitrax LocoMotion System makes them run like the real thing too!
- Scaleable Speed Stabilization (Back EMF) with simple setup & 256 level resolution.
- Torque Compensation.
- 128 Speed Step operation (14 or 28 steps can also be used).
- Momentum with acceleration and deceleration.
- Normal Direction of Travel is user selectable.
- Switching Speed feature for easier and faster access to yard speeds.
- 3 Step Speed Tables set start, mid and max voltage for custom control.
- 28 Step Speed Tables with 256 level resolution for precise control.

Read More >

8 Reviews Hide Reviews Show Reviews

  • 5
    My Go To Decoder!

    Posted by Richard Wolfe on Apr 14th 2019

    This was the first Decoder I ever installed in N-Scale. It is not a drop in but worth the work. Very impressed how well my older Atlas GP-11 runs on DCC. I tried a TCS split board in another loco after this but found I had to do just as much grinding to make it fit. Same amount of Soldering too. Save $20 and by this Decoder!

  • 5

    Posted by keith courchaine on Apr 13th 2019

    these decoders fit just right in the boiler of a kato mikado. they perform great

  • 5
    My GoTo decoder

    Posted by Douglas Nicholls on Nov 26th 2018

    Although the 126T is a bit narrower, this is the same length and costs less. I've used it in dozens of conversions and it's simple and reliable. I actually prefer it to the so-called drop ins which often need far more fettling to fit. One will fit in the Minitrix 51 2913 00 0-6-0 steamer, which is probably my smallest install (but not the most difficult. ) Great product!

  • 5
    excellent to deal with A1

    Posted by Eugen Stiefelmayer on Jun 29th 2018

    Great to work with

  • 5
    Excellent for N-scale

    Posted by Williams on Jun 29th 2018

    A great tiny decoder to work with !

  • 5
    The Best

    Posted by Dennis E. Perkins Sr. on Jun 29th 2018

    Fits good in a Spectrum slope back tender with lots of room for working...

  • 5
    Excellent decoder

    Posted by Vineet Bhalla on Jun 29th 2018

    This is an excellent decoder both for the American and European locomotives. Slow speed running is superb ( loaded or unloaded with rolling stock) with no change in loco speed on flat track as well as climb while pulling 12 x four axle wagons. Used them on Bachman GP40, GP50, Flying Scotsman.

  • 5
    Digitrax DZ126 Z / N / HO Scale Mobile Decoder

    Posted by Hank M on Jun 29th 2018

    Over the last few years I have purchased a number of these DCC decoders and all (self installed) are operating flawlessly.