Many M.T.H. Proto-Sound 2.0* locomotives can operate on both AC or DC current, the DCS Commander may be the affordable DCS command control option you've been looking for. The DCS commander outputs up to 18 volts of DC power and includes a built-in 5amp resettable breaker making it a perfect solution for small M.T.H. O Gauge layouts exclusively running Proto-Sound 2.0* locomotives. *Locomotives must be equipped with the Proto-Sound 2.0, 3-volt system.
External Power Required See Related Accessories
Primarily for HO but also for PS-2 (3 volt system) 'O' Gauge Locomotives running on smaller layouts. Speed adjustment in one-scale-mile-per hour steps Independent feature control: tune your engines' sound, lights, smoke and acceleration/deceleration settings Smoke on/off Doppler sounds: simulate the classic sound effect of a train approaching and then whizzing past Accent sounds: activate any one of 7 individual sounds, including signal forward and reverse sounds, coupler slack, engine start-up and shut-down, engine labor and drift Activate Passenger Station and Freight Yard Sounds Individual locomotive control: select up to 99 Proto-Sound 2.0* or later engines Selectable control configurations: choose between analog DC, DCC** and DCS modes * Requires Proto-Sound 2.0 3-volt system. Locomotives equipped with the 3-volt system can be indentified by the square battery charging jack located on the locomotive. See the Proto-Sound 2.0 locomotive's operator's manual for location of the charging jack. ** DCC controller required for DCC operation.